Egis ClimaSwing A60

Not every chilled room runs at 2 C. Dairy dispatch areas, beverage godowns, flower auction halls and pharma 8-15 C stores hold product just below ambient — and insulating those rooms with a deep-freeze door wastes money on every leaf. The ClimaSwing A60 is the ambient-chiller hinged door: a 60 mm PUR insulated leaf rated for +5 C duty, a full-perimeter EPDM gasket, stainless hinges and lever furniture, built for 0 to +15 C rooms where a lighter, economical door is the right engineering.

The A60 keeps the cold-chain detailing that matters. The frame is thermal-bridge-free so the leaf edge never sweats; a drop threshold seal option closes the under-door gap without a raised trip hazard; and an inside safety release with a luminous handle keeps every room safe for entrapped personnel. A porthole or vision panel option lets staff check stock without opening the door, and faces are food-safe white GRP or coated steel with a stainless option for washdown-adjacent areas.

Egis positions the A60 below the ChillSwing C80H: where the C80H carries 80 mm insulation and a heated gasket for true 0-2 C duty, the A60 is the economical answer for milder chiller rooms, ripening chambers and staging areas. Same hardware family, same service schedule, lower cost per opening. Clear openings run from 800 to 1200 mm wide and 2000 to 2400 mm high.

Insulation is not free — every extra 20 mm of leaf thickness adds material cost, weight on the hinges and swing effort for staff, every cycle for the life of the door. Specifying an 80 or 120 mm deep-freeze leaf on a room that never drops below +5 C buys nothing but cost. The A60's 60 mm PUR core is matched to the actual duty: enough to hold +5 C against Indian ambient with a sensible refrigeration load, light enough to swing easily on standard stainless hinges for decades.

What the lighter build does not compromise is the seal. Air exchange through a leaky door dwarfs conduction through the leaf, so the A60 carries the same full-perimeter EPDM gasket discipline as the heavier range: continuous compression around all four sides, a threshold seal that closes the bottom gap, and a frame with no thermal bridges to sweat and drip. In a mild chiller room, the seal is the energy story — and it is fully specified.